Auto Parts Knowledge | Car Disc Brake Components
- Share
- publisher
- 、Saskia
- Issue Time
- Aug 24,2023
Summary
Disc brakes or disc brakes are a car braking system that utilizes additional components in the form of a disc rotor or disc clamped by two brake pads to slow down the tire rotation.

Frequently Asked Questions
Q1. What are disc brakes made of?
The brake disc (rotor) is usually made of cast iron, sometimes with carbon-ceramic or high-carbon alloys for performance use. The caliper is typically cast iron or aluminium, pads use a friction material bonded to a steel backing plate, and pistons are steel or ceramic.
Q2. What are the main components of a disc brake?
A disc brake system includes the rotor, caliper, brake pads, pistons, seals, caliper slide pins, the wheel hub and the brake line delivering hydraulic pressure.
Q3. How do disc brakes work?
Pressing the pedal sends hydraulic pressure to the caliper, which squeezes the pads against both sides of the spinning rotor. Friction converts the vehicle's kinetic energy into heat, slowing the wheel.
Q4. What is the difference between solid and vented discs?
Vented discs have two friction plates separated by internal vanes that pump air through as the wheel spins, dissipating heat far better than a solid disc. They are typically fitted to the front wheels.
Q5. When should brake discs be replaced?
Replace discs when they are below the minimum thickness stamped on the rotor, when they are deeply scored, warped (causing pedal pulsation) or cracked. Pads are usually replaced in pairs with the discs inspected at the same time.